T-Bar
© Frank Ford, 9/27/98 Photos by FF
Actually, Martin's first "truss rod" was a simple affair consisting of an ebony piece about 3/16" wide, inserted just below the fingerboard:
In the days of wide 12-fret necks and gut strings, this was sufficient reinforcement.
Once steel strings became standard and narrower 14-fret necks were common, Martin started using a steel insert with a "T" cross section:
This insert made the neck more rigid, and was the standard reinforcement until the mid 1960s, when the 3/8" square tube was introduced:
Some players insist that the Martins with the "T-bar" are better sounding, but that's a difficult thing to prove. Do the guitars sound better because of the neck reinforcement, or simply because they are older? (I think the latter.)
Back to Glossary
Back to Index Page