FRETS.COM Illustrated Glossary


Adjustable, usually
Truss Rod
© Frank Ford, 9/27/98 Photos by FF

A truss rod is an adjustable neck reinforcement designed to resist the forward bending force of the high tension of steel strings. Sometimes a nonadjustable steel reinforcement is called a truss rod, as the
"T-bar" in earlier Martin instruments.

Here's a longitudinal section of a Taylor guitar neck showing its adjustable truss rod:

You can see the steel rod buried deep in the neck. Above the rod is a maple "filler strip" which fills the gap between the rod and the fingerboard. Maple or other hard wood is chosen for filler strips because it resists compression when the rod is tightened.

Virtually all truss rods work in the same way. When tightened the rod compresses the back of the neck which is very narrow and soft compared to the front of the neck (ebony fingerboard.) When the back of the neck compresses, the neck bends backward in a smooth curve, against the pull of the strings.

A few truss rods are made of other metal elements, which act in the same way, bending as compression is applied to the surface nearest the back of the neck. Then when the rod bends, the neck goes with it.


At the peghead end, you can see the adjusting nut set into the pocket which will have a
truss rod cover applied over it:




Near the body, the truss rod is firmly anchored in the heel:


Some truss rods are adjustable inside the body, and have no truss rod cover at the peghead:

This is a Martin adjustable truss rod, which protrudes inside the guitar body and is adjustable through the soundhole.

Adjustable truss rods are there only to keep the neck straight. They are not used for action or intonation adjustments and have absolutely no effect on the neck angle, so they cannot prevent the need for resetting the necks of older instruments.

Classical guitars do not need truss rods because they have much lower string tension. Generally, the higher the string tension and the thinner the neck, the more the need for a truss rod.


Back to Glossary


Back to Index Page